Impregneer
DIGO IMPREGNEER
Product: Impregneer is an extreme thin solution of resins on the basis of siloxanes that are extremely water-repellent after drying.
Specific use: Impregneer is excellently suitable for making surfaces of concrete, bricks, masonry, cement, decorative plaster etc. water-repellent. Impregnate should not be used on cellar walls whose moisture is caused by water pressure.
Characteristics: Impregneer is water-repellent, preventing growth of mosses and fungi and prevents walls to become filthy. By means of the moisture-resistance, a better insulation value is obtained. Impregneer can be painted over very well. Maximum results will only be achieved if the surface is saturated completely.
Impregneer will not form a blocking tight layer but will remain breathing.
Colour: Impregneer is colourless.
Processing temperature: Do not use at a surface and ambient temperature below + 5°C.
Method of application: Impregneer can be applied by means of a brush, roller or spraying equipment.
Protect Windows against spray as it gives a blue nebula and is impossible to remove.
Consumption: Depending on the absorption of the surface to be treated ± 5m2 per litre.
Determine correct use by means of test applications.
Packing/Contents: In coated cans of 2 and 5 litres.
Surface: Walls to be treated must be wind-dry.
Storage: Protect against heat and frost.
Product is inflammable.
42 (6-2016)