Isolerende muurverf
DIGO ISOLERENDE MUURVERF
Product: Isolerende muurverf is a paint (latex) for indoor finishing, on a basis of an alkali-resistant, plasticizer-free and synthetic resin dispersion.
Specific use: Isolerende muurverf is suitable, due to its composition, for the repainting of lightly soiled surface areas of walls and ceilings. Indoor use
Characteristics:
Isolerende muurverf has a very good adhesion, gives an excellent coverage, is breathing, scrub-proof and solvent-low.
Isolates light pollution caused by water circles/nicotine/yellowed old surfaces.
Gloss: Mat.
Colour: Available according to an elaborate colour spectrum. Various lots can show small differences in colour. In order to prevent colour differences, it is advised to order the total quantity required for a project. Always mix different lots with each other.
Processing temperature: Do not use at a surface and ambient temperature below + 5°C.
Method of application: Isolerende muurverf is applied by means of a brush, roller or spraying. If multiple layers are applied, the first layer may optionally be diluted with 5% water.
Consumption: Depending on the surface ± 0.2 ltr/m²
Packing/Contents: In plastic buckets of 2, 5 and 10 l.
Transportation and storage: Transport and store frost-free.
Surface: The surface must be dry and free from dust, grease and powdery coats of paint (wipe-resistant, whitewash coats). Powdery surfaces must be pre-treated with Undercoating solvent-free. (See separate product information sheet.) See product information sheet Renovatie voorstrijk for lightly soiled surfaces.
Remark: It can be cleaned with all kinds of cleaners except solvents. Specially suitable for do-it-yourself.
28 (6-2016)
Overzicht Isolerende muurverf stalen
For a product to color, you can choose to number of color ranges.
Such as: Digo-color range / NCS / RAL
For an impression of colors:
Ral-kleuren bekijken
NCS-kleuren bekijken
Although the utmost attention has been paid to the accuracy of the colors, can not be guaranteed that every steel fully corresponds to the original materials. There may be colour deviations result from:
a the printing process
b different structures
c variations in natural raw materials
d your screen settings.