SL Muurverf
DIGO SL MUURVERF
Product: SL-muurverf is a masonry paint specially developed for outer walls. On the basis of alkyl silicone resin emulsion and alkali-resistant, plasticizer-free and non-saponifiable synthetic resins dispersion.
Specific use: SL-muurverf is used on all stony and plastered outer walls where excellent vapour diffusion and low water absorption is required.
Characteristics: SL-muurverf has a good adherence, excellent protection, a high permeability and a very low water absorption (a low water absorption produces little contamination).
Water absorption (KWA): [kg/ (m2*-t) ] 0.08
Permeability: [ g/ (m2*d) ]
SD: [m] 0.062
Colour: Available according to an elaborate colour spectrum. Various lots can show small differences in colour. In order to prevent colour differences, it is advised to order the total quantity required for a project. Always mix different lots with each other.
Processing temperature: Do not use at a surface and ambient temperature below + 5°C.
Method of application: Before applying the first layer of SL-muurverf, pre-treat the base with Siliconen voorstrijk (see product information sheet). After drying (+ 12 hours), the SL-muurverf is applied in one or two layers. SL-muurverf is applied with roller, brush or spraying equipment.
Surface: The surface must be free from grease and free from powdery and loose coats of paint and dry. Always pre-treat the surfaces to be treated with Siliconen voorstrijk .
Consumption: Depending on the surface ± 0.2ltr/ m2.
Packing/Contents: In plastic buckets of 2, 5 and 10 litres.
Transportation and storage: Transport and store frost-free.
Remark: It can be cleaned with all kinds of cleaners except solvents. Specially suitable for do-it-yourself. In the case of strong wind and bright sunlight, precautions against fast drying must be taken.
30 (6-2016)
Overzicht SL Muurverf stalen
For a product to color, you can choose to number of color ranges.
Such as: Digo-color range / NCS / RAL
For an impression of colors:
Ral-kleuren bekijken
NCS-kleuren bekijken
Although the utmost attention has been paid to the accuracy of the colors, can not be guaranteed that every steel fully corresponds to the original materials. There may be colour deviations result from:
a the printing process
b different structures
c variations in natural raw materials
d your screen settings.