Ruwer SL
DIGO SILICONEN RUWER
Product: Siliconen-Ruwer is a ready to use quartz paint, consisting of alkali plasticizer-free and non-saponifiable acrylic dispersion, silicone resin quartz grains, fine fillers and pigments. Suitable for outdoor use
Specific use: Siliconen-Ruwer is suitable as a priming agent for decorative plasters on the basis of silicone-based resin on surfaces of turnip work, sanding work, concrete.
Characteristics: Siliconen-Ruwer has a very good adhesion, high pigmentation, is breathing and scrub-proof.
Water absorption (KWA): [ kg/ (m2*-t) ] 0.06
Permeability (WDD): [ g/ (m2*d) ] 95.4
SD: [m] 0.2
Colour: Available according to an elaborate colour spectrum. Various lots can show small differences in colour. In order to prevent colour differences, it is advised to order the total quantity required for a project. Always mix different lots with each other.
Processing temperature: Do not use at a surface and ambient temperature below + 5°C.
Method of application: Ruwer is treated as a priming agent, applied in a layer with a brush or roller. Depending on the nature of the surface, Ruwer is applied undiluted or diluted (to a maximum of 10% water).
Consumption: Depending on the surface ½ to 1 kg per m2.
Packing/Contents: In plastic buckets of 3, 7 and 15 kg.
Surface: The surface must be dry and free from dust, grease and powdery coats of paint (wipe-resistant, whitewash coats). Powdery surfaces must be pre-treated with Digo Diepgrondering. (See separate product information sheet.
Storage: Store frost-free.
Remark: In the case of strong wind and bright sunlight, precautions against fast drying must be taken. It can be cleaned with all kinds of cleaners except solvents. If Siliconen-ruwer is used as a cement paint finish, then apply two coats.
21a (6-2016)
Overzicht Ruwer SL stalen
For a product to color, you can choose to number of color ranges.
Such as: Digo-color range / NCS / RAL
For an impression of colors:
Ral-kleuren bekijken
NCS-kleuren bekijken
Although the utmost attention has been paid to the accuracy of the colors, can not be guaranteed that every steel fully corresponds to the original materials. There may be colour deviations result from:
a the printing process
b different structures
c variations in natural raw materials
d your screen settings.