Muurverf
DIGO MUURVERF
Product: Muurverf is a paint (latex) for indoor and outdoor finishing, on a basis of an alkali-resistant, plasticizer-free and non-saponifiable acrylic dispersion.
Specific use: Muurverf is suitable for indoor and outdoor use among other things for painting over of walls and ceilings sprayed with spack, including plaster, masonry, concrete, wood fibre board, cement, gypsum board and outdoor façades. Muurverf is the preferred paint for new building and maintenance of houses, schools and offices.
Characteristics: Muurverf has a very good adhesion, gives an excellent coverage, is breathing and scrub-proof.
Water absorption (KWA): [kg/ (m2*-t) ] 0.9
Permeability (WDD): [ g/ (m2*d) ] 67.4
SD: [m] 0.3
Colour: Available according to an elaborate colour spectrum. Various lots can show small differences in colour. In order to prevent colour differences, it is advised to order the total quantity required for a project. Always mix different lots with each other.
Processing temperature: Do not use at a surface and ambient temperature below + 5°C.
Method of application: Muurverf is applied by means of a brush, roller or spraying. The first layer can possibly be diluted with 5% water, dependent on the nature and the porosity of the base.
Consumption: Depending on the surface ± 0.27ltr/ m².
Packing/Contents: In plastic buckets of 2, 5 and 10 ltr.
Transportation and storage: Transport and store frost-free.
Surface: The surface must be dry and free from dust, grease and powdery coats of paint (wipe-resistant, white wash coats) Powdery surfaces must be pre-treated with Undercoating solvent-free. (See separate product information sheet.) See product information sheet Renovatie voorstrijk for lightly soiled surfaces.
Remark: It can be cleaned with all kinds of cleaners except solvents. Specially suitable for do-it-yourself. In the case of strong wind and bright sunlight, precautions against fast drying must be taken. This product is also available without solvents.
26 (6-2016)
Overzicht Muurverf stalen
For a product to color, you can choose to number of color ranges.
Such as: Digo-color range / NCS / RAL
For an impression of colors:
Ral-kleuren bekijken
NCS-kleuren bekijken
Although the utmost attention has been paid to the accuracy of the colors, can not be guaranteed that every steel fully corresponds to the original materials. There may be colour deviations result from:
a the printing process
b different structures
c variations in natural raw materials
d your screen settings.