Ruwer
DIGO RUWER
Product: Ruwer is a ready for use quartz paint on a basis of an alkali-resistant, plasticizer-free and non-saponifiable acrylic dispersion, grains of quartz and fine and coarse fillers and pigments. Suitable for indoor and outdoor use.
Specific use: Ruwer is excellently suited as a priming agent for decorative plasters and finishing layers on surfaces such as chipboard, plasterboard etc. and surfaces of turnip work, sanding work, concrete and plaster. A fine and decorative structure results when used as a finishing coat on flat surfaces.
Characteristics: Ruwer has a very good adhesion, high pigmentation, is breathing and scrub-proof.
Water absorption (KWA): [ kg/ (m2*-t) ] 0.13
Permeability (WDD): [ g/ (m2*d) ] 87.3
SD: [m] 0.2
Colour: Available according to an elaborate colour spectrum. Various lots can show small differences in colour. In order to prevent colour differences, it is advised to order the total quantity required for a project. Always mix different lots with each other.
Processing temperature: Do not use at a surface and ambient temperature below + 5°C.
Method of application: As a priming layer, Ruwer is applied as one layer with a brush or roller. Depending on the nature of the surface, Ruwer is applied undiluted or diluted (to a maximum of 10% water). When used as a finishing layer, Ruwer is applied in two layers by means of a roller. ("wet in wet").
Consumption: Depending on the surface ½ to 1 kg per m2. As a finishing layer 1 kg per m2.
Packing/Contents: In plastic buckets of 3, 7 and 15 kg.
Surface: The surface must be dry and free from dust, grease and powdery coats of paint (wipe-resistant, whitewash coats). Powdery surfaces must be pre-treated with Digo Diepgrondering. (See separate product information sheet.)
Storage: Store frost-free.
Remark: It can be cleaned with all kinds of cleaners except solvents. Specially suitable for do-it-yourself. In the case of strong wind and bright sunlight, precautions against fast drying must be taken. This product is also available without solvents.
21 (6-2016)
Overzicht Ruwer stalen
For a product to color, you can choose to number of color ranges.
Such as: Digo-color range / NCS / RAL
For an impression of colors:
Ral-kleuren bekijken
NCS-kleuren bekijken
Although the utmost attention has been paid to the accuracy of the colors, can not be guaranteed that every steel fully corresponds to the original materials. There may be colour deviations result from:
a the printing process
b different structures
c variations in natural raw materials
d your screen settings.