Muurprotec
DIGO MUURPROTEC
Product: Muurprotec is a highly filling wall paint for inner and outer use, on the basis of alkali-resistant, plasticizer-free and non-saponifiable synthetic resin dispersions.
Specific use:Muurprotec can be used on all sound, stony and plastered bases, as well as on gypsum boards and various board materials.
Characteristics: Muurprotec has excellent adherence, high pigmentation, excellent protection and highly filling capacity, is breathing and scrub-resistant.
Water absorption (KWA): (KWA) [ kg/ (m2*-t) ] 0.02
Permeability: (WDD):[ g/ (m2*d) ] 23.9
SD: [m] 0.8
Colour: Available according to an elaborate colour spectrum. Various lots can show small differences in colour. In order to prevent colour differences, it is advised to order the total quantity required for a project. Always mix different lots with each other.
Processing temperature: Do not use at a surface and ambient temperature below + 5°C.
Processing: Muurprotec is applied in two layers with a foam plastic structure roller. The first layer is diluted with approximately 10% water. After sufficient drying, the second layer is applied undiluted.
Cellular concrete: Because of the highly filling capacity, open structures of bases such as cellular concrete can be perfectly smoothed away. Consumption: 1st layer approx.10% diluted 200 gr. per m2 - 2nd layer undiluted 500 gr. per m2.
Consumption:
1st layer approx. 10% diluted ± 150 grams per m²
2nd layer undiluted ± 350 grams per m²
Surface: The surface must be free from dust, grease and powdery coats of paint (wipe-resistant, white wash coats), dry and flat. Powdery surfaces must be pre-treated with Diepgrondering ov. During outside use on cellular concrete, always pre-treat with Siliconen voorstrijk. See product information sheet Renovatie voorstrijk for lightly soiled surfaces.
Packing/Contents: In plastic buckets of 3, 7 and 15 kg.
Transportation and storage: Transport and store frost-free.
Remark: It can be cleaned with all kinds of cleaners except solvents. In the case of strong wind and bright sunlight, precautions against fast drying must be taken.
24 (6-2016)
Overzicht Muurprotec stalen
For a product to color, you can choose to number of color ranges.
Such as: Digo-color range / NCS / RAL
For an impression of colors:
Ral-kleuren bekijken
NCS-kleuren bekijken
Although the utmost attention has been paid to the accuracy of the colors, can not be guaranteed that every steel fully corresponds to the original materials. There may be colour deviations result from:
a the printing process
b different structures
c variations in natural raw materials
d your screen settings.