Kwartsverf
DIGO KWARTSVERF
Product: Kwartsverf is a granular dispersion paint (latex) for indoor and outdoor finishing, on the basis of an alkali-resistant, plasticizer-free and non-saponifiable synthetic resin dispersion.
Specific use: Kwartsverf is fit for painting inner and outer walls where a fine granular structure is desired.
Characteristics: Kwartsverf has a very good adhesion, high pigmentation, is breathing and scrub-proof. Has a fine granular finishing structure.
Water absorption (KWA): [kg/ (m2*-t) ] 0.13
Permeability: [ g/ (m2*d) ] 67.4
SD: [m] 0.3
Colour: Available according to an elaborate colour spectrum. Various lots can show small differences in colour. In order to prevent colour differences, it is advised to order the total quantity required for a project. Always mix different lots with each other.
Processing temperature: Do not use at a surface and ambient temperature below + 5°C.
Method of application: Always pre-treat walls with Voorstrijk Bindmiddel (see product information sheet). Kwartsverf must be properly distributed and subsequently evenly rolled with a brush, fur or structural roller to obtain an even structure. In most cases treating twice is essential to obtain the proper structure.
Consumption: Dependent on the base ± 500-800 grams per m2.
Packing/Contents: in plastic buckets of 3, 7 and 15 kg.
Transportation and storage: Transport and store frost-free.
Surface: The surface must be dry and free from dust, grease and powdery coats of paint (wipe-resistant, whitewash coats). Powdery surfaces must be pre-treated with Diepgrondering ov. (See product information sheet.)
See product information sheet Renovatie voorstrijk for lightly soiled surfaces.
Remark: It can be cleaned with all kinds of cleaners except solvents. Specially suitable for do-it-yourself. In the case of strong wind and bright sunlight, precautions against fast drying must be taken.
22 (6-2016)
Overzicht Kwartsverf stalen
For a product to color, you can choose to number of color ranges.
Such as: Digo-color range / NCS / RAL
For an impression of colors:
Ral-kleuren bekijken
NCS-kleuren bekijken
Although the utmost attention has been paid to the accuracy of the colors, can not be guaranteed that every steel fully corresponds to the original materials. There may be colour deviations result from:
a the printing process
b different structures
c variations in natural raw materials
d your screen settings.