Siliconen voorstrijk
DIGO SILICONEN VOORSTRIJK
Product: Siliconen voorstrijk is a special solvent-free, alkali-resistant and a alkoxysilane-based first layer.
Specific use: Siliconen voorstrijk is used on highly-absorbing porous stony and plastered bases.
Characteristics:
Siliconen voorstrijk eliminates the excessive absorption of the base.
The permeability en co² permeability remain optimal.
Has a high penetration into mineral surfaces.
he hydrophobic layer prevents transport of salt and alkali from inside.
Working on moist surfaces.
Provides an excellent adherence with further finishing layers.
Colour: Yellowish
Processing temperature: Do not use at a surface and ambient temperature below + 5°C. Drying time approximately 8 hours.
Method of application: Siliconen voorstrijk is prepared with clean water.
Ratio: 1 part Siliconen voorstrijk/10 parts of water.
Ratio of 1 part Siliconen voorstrijk up to 14 parts of water is possible.
The desired characteristics of the prepared product can be determined by means of tests.
It is recommended to pour Siliconen voorstrijk in water.
Siliconen voorstrijk is applied full and saturated..
Siliconen voorstrijk is applied with a brush, roller or spraying equipment.
>The prepared quantity has to be processed within 12 hours.
Consumption: Dependent on the base.
1 litre Siliconen voorstrijk with 10 litres of water is for ± 55 m2
Packing/Contents: In plastic buckets of 1 litre.
Transportation and storage: Transport and store frost-free.
Surface: The surface must be dry and free from dust, grease and powdery coats of paint (wipe-resistant, whitewash coats).
Remark: The prepared quantity must be processed within 12 hours. Plants must be protected against splashing of the primer.
35 (6-2016)