Stuc-voorstrijk
DIGO STUC-VOORSTRIJK
Product: Stuc-voorstrijk is water-based, lightly filled and pigmented first layer on the basis of acrylics.
Specific use: Stuc-voorstrijk is used on bases to provide an even absorption to all kinds of plaster for indoor and outdoor use.
Characteristics: Stuc-voorstrijk eliminates the irregular absorption of the bases providing a sufficient and everywhere the same processing time with the plaster layers to be applied. Stuc-voorstrijk has a good adherence. It is water-based, without solvents, permeable, pigmented, has a very high resistance against saponification and is nearly odourless.
Colour: Yellowish
Processing temperature: Do not use at a surface and ambient temperature below + 5°C.
Method of application: Stuc-voorstrijk is evenly and sufficiently applied with a brush, roller or spraying equipment. It is important that the bases are treated evenly everywhere. Stuc-voorstrijk is prepared with clean water. Dependent on the absorption of the base: 1 part of Stuc-voorstrijk/1 or 2 parts of water.
Drying time: The best results are achieved when Stuc-voorstrijk is allowed to dry for at least 4 hours.
Surface: The surface must be free from dust, grease and powdery coats of paint (wipe-resistant, white wash coats) and dry. Powdery surfaces must be pre-treated with Diepgrondering ov (see product information sheet).
Consumption: Dependent on the base: 1 part Stuc-voorstrijk/1 part water ± 6 m2 per litre.
Packing/Contents: In plastic buckets of 2, 5 and 10 kg.
Storage: Store frost-free.
32a (6-2016)