Stuc-contact
DIGO STUC-CONTACT
Product: Stuc-Contact is a ready for use first layer. It consists of an alkali-resistant, plasticizer-free and non-saponifiable acrylic dispersion, fine and course fillers. Suitable for indoor and outdoor use.
Specific use: Stuc-Contact is a first layer that forms an adhesive bridge between cementitious mortars (or gypsum) and poor and non-absorbent surfaces such as smooth concrete, painted walls and tiles.
Characteristics: Stuc-Contact has a good adherence, optimally breathing, alkali-resistant, gives smooth surfaces a coarse structure for better adhesion of plasters.
Processing temperature: Do not use Stuc-Contact at a surface and ambient temperature below + 5°C. Drying time approximately 8 hours.
Method of application: Stuc-Contact is evenly and undiluted applied with a lambskin roller or brush on clean, dry, free from debris and grease-free surfaces.
Consumption: Approximately 250/350 grams per m2.
Packing/Contents: In plastic buckets of 6 and 14 kg.
Surface: The surface must be dry, solid and free from dust, grease and powdery coats of paint (wipe-resistant, whitewash coats). Check painted surfaces and tiles for debris, clean and degrease.
Storage: Store frost-free.
Remark: The plaster layer must be fully dry for further processing. (Possibly check with hygrometer.) Stuc-Contact improves the adhesion of plasters on various surfaces but can not take care of movement of surfaces, such as shrinkage and creepage. Stir Stuc-Contact before use. Do not dilute Stuc-Contact with water or mix with other products. Clean tools with water.
32b (6-2016)