UNI mortel
DIGO UNI MORTEL
Product: UNI Mortel is a powdery, fine granular material that consists of mineral fillers, hydraulic binders and high-quality synthetic resins.
Specific use: UNI Mortel is used for thin layer plastering of inner and outer walls. UNI Mortel is also made for replastering of, for example, painted or with decorative plaster treated outer walls. It also provides a solid base for various finishing layers.
Characteristics: UNI Mortel is waterproof, weather-resistant, shock-resistant, has a good adherence and is easy to apply. Pressure strength 10.9 N/mm² , bending strength 4.0 N/mm²
Processing temperature: Do not use UNI Mortel when the outside temperature and/or the temperature of the base can drop below + 5o C during drying.
Method of application: UNI Mortel is prepared with + litres of water per sack of 25 kg. The material is prepared lump-free with a rapid mixer. UNI Mortel is applied in layer thickness up to 4 mm as evenly and tightly as possible. After initial drying, moisten with water, scour, and scrap evenly with a spack knife. After that, scour or plaster. It is recommended to plaster a reinforcing tissue in the mortar in bases where there is a possibility of cracking. If several layers are applied, the first layer must be applied somewhat coarse and must be dry before applying the second layer. UNI Mortel can also be treated mechanically.
Consumption: + 1.3 kg per m2 per mm layer thickness.
Packing/Contents: In sacks of 25 kg.
Surface: The surface must be free from dust, grease and powdery coats of paint and dry. Pre-treat highly-absorbing surfaces with priming binding agent. Pre-treat smooth surfaces with Stuc-Contact.
Storage: Store dry and free from moisture.
Remark: Protect the façades against weather influences, such as sun, wind and rain, during processing.
17 (7-2017)