Stone
DIGO STONE
Product: Stone is a ready to use decorative plaster on the basis of an alkali-resistant, plasticizer-free and non-saponifiable acrylic dispersion, fine and coarse fillers and pigments.
Specific use: Stone is suitable for any sound level surface on indoor and outdoor walls including cellular concrete, chipboard, gypsum board and fixed coats of paint.
Characteristics: Stone is weather and water-resistant, optimally breathing, elastic, shock and scratch-resistant, has an excellent adhesion and is easy to apply.
Water absorption (KWA):[ kg/ (m2*-t) ] 0.45
Permeability (WDD):[ g/ (m2*d) ] 114.3
SD:[m] 0.2
Colour: Available according to an elaborate colour spectrum. Various lots can show small differences in colour, caused by the mineral components. In order to prevent colour differences, it is advised to order the total quantity required for a project. Always mix different lots with each other.
Processing temperature: Do not use at a surface and ambient temperature below + 5°C.
Method of application: After thoroughly stirring spread Stone evenly on the wall, which immediately results in a rough structure. Stone may also be applied with a stainless steel trowel. Afterwards the desired structure can be obtained by means of a brush, sponge or roller.
Consumption: Depending on structure and coarseness of the plaster.
Stone fine: 2 to 3 kg per m2
Stone middle: 3 to 4 kg per m2
Packing/Contents In plastic buckets of 7 and 15 kg.
Surface: The surface must be dry, flat and free from dust, grease and powdery coats of paint (wipe-resistant, white wash coats). Powdery surfaces must be pre-treated with Diepgrondering ov. See separate product information sheet. Always pre-treat the surface in colour with Ruwer. See separate product information sheet.
Storage: Protect against heat and frost.
Remark: It can be cleaned with all kinds of cleaners except solvents. Digo decorative plasters must always be applied with stainless steel tools. This decorative plaster is particularly suited for do-it-yourself. In case of strong wind and bright sunlight, precautions against fast drying must be taken. This product is also available without solvents.
7 (9-2016)
Overzicht Stone stalen
For a product to color, you can choose to number of color ranges.
Such as: Digo-color range / NCS / RAL
For an impression of colors:
Ral-kleuren bekijken
NCS-kleuren bekijken
Although the utmost attention has been paid to the accuracy of the colors, can not be guaranteed that every steel fully corresponds to the original materials. There may be colour deviations result from:
a the printing process
b different structures
c variations in natural raw materials
d your screen settings.