Rustiekpleister- SL
DIGO SILICONEN RUSTIEKPLEISTER
Product: Siliconen-Rustiekpleister is an decorative plaster for outdoor use with a very beautiful structure, without mineral binders. It consists of an alkali-resistant, plasticizer-free resin dispersion, silicone resin, fine and coarse fillers and pigments and pigments.
Specific use: Siliconen-Rustiekpleister is excellently suited for any sound level surface on outdoor walls and outer wall insulation systems.
Characteristics: Siliconen-Rustiekpleister has a good outdoor durability, is optimally breathing, shock-resistant, elastic, optimally adhesive and is easy to apply.
Water absorption (KWA):
[ kg/ (m2*-t) ] 0.13
Permeability: (WDD): [ g/ m2*d) ] 121
SD: [m] 0.107 µ 54
Colour: Available according to an elaborate colour spectrum. Various lots can show small differences in colour. In order to prevent colour differences, it is advised to order the total quantity required for a project. Always mix different lots with each other.
Processing temperature: Do not use at a surface and ambient temperature below + 5°C.
Method of application: Siliconen-Rustiekpleister is applied with a stainless steel finishing trowel, or spraying equipment (among other things funnel pistol). Apply Rustiekpleister by means of a finishing trowel at grain thickness, after that structure with a plastic trowel. When using spraying equipment, spray until an even structure is obtained.
Consumption
Fine: ± 2.3 kg per m2
Middle: ± 2.6 kg per m2
Coarse: ± 3.8 kg per m2
Packing/Contents: In plastic buckets of 8 and 17 kg.
Surface: The surface must be dry and free from dust, grease and powdery coats of paint (wipe-resistant, whitewash coats). Powdery surfaces must be pre-treated with Undercoating solvent-free. See separate product information sheet. Always pre-treat the surface in colour with SL-Ruwer. See separate product information sheet.
Storage
Protect against heat and frost.
Remark: It can be cleaned with all kinds of cleaners except solvents. Rustiekpleister can be painted over. Digo decorative plasters must always be applied with stainless steel tools. In the case of strong wind and bright sunlight, precautions against fast drying must be taken.
2a (6-2016)
Overzicht Rustiekpleister- SL stalen
For a product to color, you can choose to number of color ranges.
Such as: Digo-color range / NCS / RAL
For an impression of colors:
Ral-kleuren bekijken
NCS-kleuren bekijken
Although the utmost attention has been paid to the accuracy of the colors, can not be guaranteed that every steel fully corresponds to the original materials. There may be colour deviations result from:
a the printing process
b different structures
c variations in natural raw materials
d your screen settings.