Lumiplast
DIGO LUMIPLAST
Product: Lumiplast is a decorative plaster for indoor use. It is on the basis of an alkali-resistant, plasticizer-free and non-saponifiable transparent acrylic dispersion and fast-dyed stained natural stone grains.
Specific use: Lumiplast is suitable for any sound surface on indoor ceilings and walls including concrete, chipboard, gypsum board and fixed coats of paint.
Characteristics: Lumiplast is waterresistant, breathing, elastic, scratch, crack and shrink resistant, is excellent sticking and easy to apply.
Water absorption (KWA): [ kg/ (m2*-t) ] 1.46
Permeability (WDD): [ g/ m2*d) ] 176.3
SD: [m] 0.1
Colour:
Lumiplast is delivered in standard colours. Various lots can show small differences in colour, caused by the mineral origin of the natural stone grain. In order to prevent colour differences, it is advised to order the total quantity required for a project. Always mix different lots with each other.
Processing temperature: Do not use at a surface and ambient temperature below + 5°C.
Method of application:
Lumiplast is applied with a stainless steel trowel evenly and amply on grain thickness. After slight drying (± 1 hour), plaster with a clean wet stainless steel trowel. When plastering too long and/or too hard, the stainless steel trowel can cause dark stains.
Consumption: Lumiplast ± 5 kg per m2.
Packing/Contents: In plastic buckets of 7 and 15 kg.
Surface: The surface must be dry and free from dust, grease and powdery coats of paint (wipe-resistant, whitewash coats). Powdery surfaces must be pre-treated with Undercoating solvent-free. See separate product information sheet. Highly-absorbing surfaces must be pre-treated with Ruwer. See separate product information sheet.
Storage: rotect against heat and frost.
Remark:
Can be cleaned with all kinds of cleaners except solvents. Digo decorative plasters must always be applied with stainless steel tools.
5 (6-2018)
Overzicht Lumiplast stalen
Although the utmost attention has been paid to the accuracy of the colors, can not be guaranteed that every steel fully corresponds to the original materials. There may be colour deviations result from:
a the printing process
b different structures
c variations in natural raw materials
d your screen settings.