Structuurpasta
DIGO STRUCTUURPASTA
Product: Structuurpasta is a ready to use paste-like decorative plaster on a basis of an alkali-resistant, plasticizer-free and non-saponifiable acrylic dispersion, fine and coarse fillers and pigments.
Specific use: Structuurpasta is suitable for any sound level surface on indoor and outdoor walls and ceilings including chipboard, gypsum board and fixed layers of paint. Structuurpasta is also excellently fit for ceilings (rendered work).
Characteristics: Structuurpasta is weather-resistant and water-repellent, optimally breathing, shock-resistant, elastic, optimally adhesive and is easy to apply.
Colour: Available according to an elaborate colour spectrum. Various lots can show small differences in colour. In order to prevent colour differences, it is advised to order the total quantity required for a project. Always mix different lots with each other.
Processing temperature: Do not use at a surface and ambient temperature below + 5°C.
Method of application: Structuurpasta can be applied with a stainless steel trowel, brush, roller (lambs wool/foam or hard plastic) and spraying equipment, depending on the desired structure.
Consumption: Depending on the surface ± 1 ½ kg per m2.
Packing/Contents: In plastic buckets of 7 and 15 kg.
Surface: The surface must be free from dust and powdery coats of paint (wipe-resistant, whitewash coats). Powdery surfaces must be pre-treated with Diepgrondering ov. See separate product information sheet. Always pre-treat the surface with Ruwer. See separate product information sheet.
Storage: Protect against heat and frost.
Remark: Can be cleaned with all kinds of cleaners except solvents. Structure paste can be painted over. Digo decorative plasters must always be applied with stainless steel tools. This decorative plaster is particularly suited for do-it-yourself. In the case of strong wind and bright sunlight, precautions against fast drying must be taken. This product is also available without solvents.
9 (6-2016)
Overzicht Structuurpasta stalen
For a product to color, you can choose to number of color ranges.
Such as: Digo-color range / NCS / RAL
For an impression of colors:
Ral-kleuren bekijken
NCS-kleuren bekijken
Although the utmost attention has been paid to the accuracy of the colors, can not be guaranteed that every steel fully corresponds to the original materials. There may be colour deviations result from:
a the printing process
b different structures
c variations in natural raw materials
d your screen settings.