Granietpleister Fijn
Product: Granietpleister is a decorative plaster for indoor and outdoor use on a basis of a transparent, alkali-resistant, plasticizer-free and non-saponifiable acrylic dispersion and fine or coarse natural stone grains.
Specific use: Granietpleister is suitable for any sound and level surface on indoor and outdoor ceilings and walls including concrete, chipboard, gypsum board and fixed coats of paint.
Characteristics: Granietpleister is weather and water-resistant, optimally breathing, elastic, scratch-, crack- and shrink resistant, has good adhesion and is easy to apply.
Water absorption (KWA): [ kg/ (m2*-t) ] 1.46
Permeability (WDD): [ g/ (m2*d) ] 176.3
SD: [m] 0.1
Colour:
It is delivered in standard colours and on request. Various lots can show small differences in colour, caused by the mineral origin of the natural stone grain. In order to prevent colour differences, it is advised to order the total quantity required for a project. Always mix different lots with each other.
Processing temperature: Do not use at a surface and ambient temperature below + 5°C.
Method of application:
Granietpleister is applied with a stainless steel trowel evenly and amply on grain thickness. After slight drying (± 1 hour), plaster with a clean wet stainless steel trowel. When plastering too long and/or too hard, the stainless steel trowel can cause dark stains.
Consumption: Granietpleister fine : ± 3 kg per m2.
Packing/Contents: Granietpleister fine (fine) in plastic buckets of 6 and 13 kg.
Surface: The surface must be dry and free from dust, grease and powdery coats of paint (wipe-resistant, whitewash coats). Powdery surfaces must be pre-treated with Undercoating solvent-free. See separate product information sheet. Highly-absorbing surfaces must be pre-treated with Ruwer. See separate product information sheet.
Storage: Protect against heat and frost.
Remark: It can be cleaned with all kinds of cleaners except solvents. Digo decorative plasters must always be applied with stainless steel tools. In the case of strong wind and bright sunlight, precautions against fast drying must be taken.
6f (6-2016)
Overzicht Granietpleister Fijn stalen
A selection from a wide range of colors
Samples shown are standard.
More or less of certain color is not a problem.
Although the utmost attention has been paid to the accuracy of the colors, can not be guaranteed that every steel fully corresponds to the original materials. There may be colour deviations result from:
a the printing process
b different structures
c variations in natural raw materials
d your screen settings.