Ulmerstuc

Water absorption: 
(KWA): [ kg/ (m2*-t)] 0.52
Permeability: (WDD): [ (g/ m2*d) ] 226.1
SD: [m] 0.1

Colour: Available according to an elaborate colour spectrum. Various lots can show small differences in colour. In order to prevent colour differences, it is advised to order the total quantity required for a project. Always mix different lots with each other.

Processing temperature:  Do not use at a surface and ambient temperature below + 5 oC.

Method of application: Ulmerstuc is applied with a stainless steel trowel at grain thickness. After some time, depending on drying and absorption of the surface, the final structure is obtained by means of a plastic trowel. Ulmerstuc can also be sprayed by means of proper spraying equipment (e.g. funnel pistol).

Consumption:
1 mm  ± 2½ kg per m2
2 mm  ± 3 kg per m2
3 mm  ± 3½ kg per m2

Packing/Contents: In plastic buckets of 8 or 17 kg.

Surface: The surface must be dry and free from dust, grease and powdery coats of paint (wipe-resistant, whitewash coats). Powdery surfaces must be pre-treated with Diepgrondering OV. See separate product information sheet. Always pre-treat the surface in colour with Ruwer. See separate product information sheet.

Surfaces that can cause discolouration, pre-treat with Renovatie Voorstrijk. See separate product information sheet.

Storage: Protect against heat and frost.

Remark: It can be cleaned with all kinds of cleaners except solvents. Ulmerstuc can be painted over. Digo decorative plasters must always be applied with stainless steel tools.

In the case of strong wind and bright sunlight, precautions against fast drying must be taken. This product is also available without solvents.

1     (9-2016)

Overzicht Ulmerstuc stalen

For a product to color, you can choose to number of color ranges.
Such as: Digo-color range / NCS / RAL
For an impression of colors:
Ral-kleuren bekijken
NCS-kleuren bekijken